tv4 tcvcxo series surface mount or full size metal thru-hole temp. compensated voltage controlled xtal oscillator hcmos, clipped sine wave or sine wave compatible standard specifications overall frequency 1.0 to 15 ppm over operating temperature range available operating temperature range 0 to +50 c to -40 to +85 c available supply voltage (vcc) 5.0 volts and 3.3 volts available output load (see test circuit 7) 10 ttl loads or 15pf control voltage range (cvr) 0.5 to 4.5 volts for 5.0 volt supply; 0.0 to 3.3 volts for 3.3 volt supply pullablity over cvr 5, 10, 15 ppm. consult factory for 25 ppm. linearity 10% (consult factory for 5%) part numbering guide tcvcxo package, max height frequency stability (fs) frequency in mhz frequency deviation (pullability) over cvr 3tv4 6 h 100 a t - 60.0m - xxx (internal code or blank) consult factory for available frequencies and specs. not all options available for all frequencies. a special p/n may be assigned. s: 5 ppm r: 10 ppm frequency stability is inclusive of frequency shifts due to calibration, temperature, supply voltage, shock, vibration and load (425) 776 - 1880, fax: (425) 776 - 2760, ple - sales@pletronics.com, www.pletronics.com 28 jan 2004 pl tronics, inc. mechanical: not to scale inches (mm) 6=thru-hole, 5.0mm 7=surface mount, 5.5mm 8=surface mount, 4.0mm 9=thru-hole, 8.5mm hcmos clipped sine wave q: 15 ppm t: 25 ppm operating temperature range {tightest fs available} a: 0 to +50 c { 1.0 ppm } b: 0 to +70 c { 1.5 ppm } c: -10 to +70 c { 2.0 ppm } d: -20 to +75 c { 2.0 ppm } e: -30 to +75 c { 2 .5 ppm } f: -40 to +85 c { 5.0 ppm } 010: 1.0 ppm 015: 1.5 ppm 020: 2.0 ppm model / supply voltage tv4= 5.0 volts 5% 3tv4= 3.3 volts 5% stability vs. temp vs. vcc / load aging 0.5 ppm maximum over vcc 5% / 0.3 ppm maximum over load 5% 3 ppm first year, 1 ppm per year thereafter at 25 c 5% frequency adj by trimmer 3 ppm minimum output logic sine wave logic ?1? 90% of vcc min logic ?0? 10% of vcc max 1 volt p-p minimum output voltage levels supply current (icc) 20 to 40 ma max 2 to 5 ma max 10 k // 10 pf 025: 2.5 ppm 030: 3.0 ppm 050: 5.0 ppm logic c: clipped sine wave h: hcmos s: sine wave package 6 package 7 package 9 package 8 on test circuit for clipped sine wave only: add a 20 k resistor from output to ground consult factory due to part size and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code. 100: 10.0 ppm 150: 15.0 ppm trimmer hole locations may vary pl tronics , inc. 19013 36th ave. w, suite h lynnwood, wa 98036 usa manufacturer of high quality frequency control products . portions of the part number that appear after the frequency may not be marked on part (c of c provided) .748 (19.0) max .492 (12.5) max .600 (15.24) .300 (7.62) 8 14 7 1 vcon vcc out gnd 10.00 mhz ? 60.00 mhz .740 (18.8) max .461 (11.7) max .600 (15.24) .300 (7.62) 8 14 7 1 vcon vcc out gnd .157 (4.0) .457 (11.6) .386 (9.8) vcc gnd out gnd gnd (2.54) typ .055 (1.4) .110 (2.8) vcon 4 5 3 1 2 .799 (20.3) .335 (8.5) max vcc out vcon gnd gnd .457 (11.6) .300 (7.62) max 0.375 (9.4) .600 (15.24) .600 (15.24) .799 (20.3) .300 (7.62) .217 (5.5) max .197 (5.0) max .193 (4.9) min tab .04 x .10 (1.0 x 2.5) .66 (16.76) .12 (3.0) .17 .04 x .20 (1.0 x 5.08) .100 (4.3) .858 (21.8) max .157 (4.0) min
|
